If you own an Air Arms TX200 MKIII and are having a problem cocking it completely, for example, the auto safety is not engaging or the anti bear trap device isn’t releasing, there is probably an easy fix. I bought a new TX200 recently and immediately began having problems. Once cocked, I could not get the anti bear trap device to unlock the cocking handle. I would have to hold the cocking lever as far as I could push it an then release the beartrap device and let up on the cocking handle. Also the auto safety wasn’t engaging. I searched online and found a lot of similar complaints but only one solution that didn’t involve sending the rifle back for repairs. The one solution I found involved taking the trigger assy completely apart and soldering a piece of metal onto one of the trigger parts. That’s a job too difficult for all but the most daring do-it-yourselfer. And after looking closely at the rifle and its superb quality and engineering I found it implausible that the Air Arms Trigger would need such altering.